Sy48 Specifications

72 Inputs Channels

• Assignable in Mono/Stereo/Multiple (XFAD mode)
• Input analog gain (SI-8D) -27 to +63 dB , 1.5 dB steps
• Input digital Gain (DI-8S/Src) -6 to +6 dB , 0.1 db Steps
• Delay up to 5000 Samples (100ms /30m @48kHz)
• Dynamics : Noise Gate, Expander, Compressor, Limiter 12 parameters
• Low Cut (12 dB/oct) 1/12 octave steps
• 4 bands Parametric EQ (Full Band, +/- 15 dB + Notch)
• Independent Pan/Balance for each channel in each Bus (Aux)

40 mix Busses

• Assignable as Group/ Aux / Masters / Matrix
• Mono, Stereo or LCR (XFAD mode)
• 40 bus on system Outputs (MO-8D, XO-8D, DO-8A, DO-8X, DO-8XES)
• 16 bus on DSP line outputs

2 monitor busses assignable to 3 various monitoring circuits and/or standard outputs

• Up to 144 physical Outputs
• Up to 112 analog or AES outputs with or without HyperDrive processing (up to 128 Outputs with LEM)
• 16 send line
  

HyperDrive Output processing (XO-8D, DO-8X and DO-8XES audio modules)

• Dynamics : Gate, Expander, Compressor, Limiter 12 parameters
• 8 Bands Parametric EQ (Full band +/-15 dB + Notch)
• Delay up to 65000 samples (1350 ms / 400m @48kHz)
• Output Gain (+10 to +22dBu or -12 to 0dBFS)

Sensoft - Real time console manager (Windows™ XPE operating system)

• Real-time display of all mixing parameters
• console and fader function configuration
• Patch IN : inputs to faders assignement
• XFAD mode for inputs channels and output busses
• Assignable inserts (inputs, busses) and direct outputs
• Delay on inputs
• Channel processing controls
• Channel and bus routing and sends
• Independent panning per channel per bus
• Patch OUT : bus to outputs assignement
• Bus modes (mono, stereo, LCR, LCR+M)
• 16 internal processes for outputs
• Routing of processed Groups and Aux to Matrix or Master
• 16 external Inserts or busses
• Monitoring - 3 circuits and levels
• Monitoring input / output priority and modes
• File memories for shows
• Enhanced show software with New Q / Page display and control for theatre applications
• Load/Goto/Prev/Next Q / page recalls / Crossfade and Midi / MTC automation
• Midi Fader start and mute controls
• OverRam for updating through Q / pages
• Relax channels from automation
• Copy / Paste and Flat
• Off-Line mode
• Test signal (sine/white and pink noise)
• Off Line programming on PC